M5Stack Official M5StickC PLUS-PLUS2 with Watch Accessories Mini IoT Development Kit 1.14-inch TFT Screen IoT Controller

M5StickC PLUS

M5StickC PLUS is powered by ESP32-PICO-D4 with Wi-Fi and is an upgrade of the original M5StickC with a bigger screen .It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich your creativity, and speed up your IoT prototyping. Developing with M5StickC PLUS takes away a lot of the pains from the development process. M5StickC Plus is one of the core devices in M5Stacks product series. The compact body is integrated with rich hardware resources, such as infrared, RTC, Microphone, LED, IMU, Buttons, PMU,etc. Improvements from the regular StickC are a buzzer, bigger screen (1.14-inch, 135 * 240 resolution LCD Screen) and more stable hardware design. This revision increases the display area by 18.7%, and the battery capacity from 95mAh to 120mAh. It also supports the HAT and Unit family of products.

Power switch operation:
*Power on :Press power button for 2 seconds
*Power off :Press power button for 6 seconds

M5StickC PLUS2

M5StickC PLUS2 is an iterative version of M5StickC PLUS, featuring the ESP32-PICO-V3-02 chip as the main controller with built-in WiFi functionality. The compact device integrates a wealth of hardware resources within its small form factor, including infrared, RTC, microphone, LED, IMU, buttons, buzzer, and more. It boasts a 1.14-inch TFT screen with a resolution of 135*240, driven by the ST7789V2. The battery capacity has been increased to 200mAh, and the interface also supports HAT and Unit series products. This compact and versatile development tool is designed to spark limitless creative possibilities.

M5StickC PLUS2 facilitates the rapid prototyping of IoT products, streamlining the entire development process. Even beginners in programming can easily build interesting applications and apply them to real-life scenarios using M5StickC PLUS2.

*Power on:
To power on the device, press and hold "Button C" for more than 2 seconds, or trigger the IRQ signal by the RTC regularly. After triggering the wake-up signal, set the HOLD (GPIO4) pin to a high level (1) during program initialization to maintain the power supply. Otherwise, the device will enter the shutdown state again.
*Power off:
When no USB external power supply is available, press and hold "Button C" for more than 6 seconds. Alternatively, when there is no USB external power supply, set HOLD (GPIO4) to 0 during program operation to power off the device. When the USB is connected, press and hold "Button C" for more than 6 seconds to turn off the screen and enter hibernation mode, but not power off the device.

M5StickC PLUS Features

*ESP32-based support Wi-Fi
*Built-in 6-Axis IMU
*Red LED
*IR transmitter
*Microphone
*RTC
*Buttons, LCD(1.14 inch)
*Built-in Lithium Polymer Battery
*Extendable Socket
*Built-in Passive Buzzer
*Wearable & Wall mounted
*Compatible with multi-platform development:
—UIFlow
—MicroPython
—Arduino
—.NET nanoFramework

M5StickC PLUS2 Features

*ESP32-­PICO-­V3-­02-Base，support WiFi
*Built-in 6-Axis IMU
*IR transmitter
*Microphone
*RTC
*Buttons, LCD(1.14 inch)
*Built-in Lithium Polymer Battery@200mAh
*Extendable Socket
*Built-in Passive Buzzer
*Wearable & Wall mounted
*Compatible with multi-platform development:
—UIFlow
—MicroPython
—Arduino
—.NET nanoFramework

Applications

Internet of things terminal controller
Wearable devices
Stem education product
DIY creation

M5StickC PLUS Includes

1x M5StickC Plus

M5StickC PLUS with Watch Accessories Includes

1x M5StickC PLUS
1x LEGO adapter
1x Wall/1515
1x Watch strap
1x Type-C USB (50cm)

M5StickC PLUS2 Includes

1x M5StickC Plus2

M5StickC PLUS2 with Watch Accessories Includes

1x M5StickC PLUS2
1x LEGO adapter
1x Wall/1515
1x Watch band
1x Type-C USB(50cm)

M5StickC PLUS Specification

M5StickC PLUS2 Specification